New 24pcs Bundle Wedge Tiles Acoustic Soundproof Foam Studio Panel KK1035

Description

Brand New Wedge Tiles Acoustic Tile Foam
Made by Imported High Quality Foam
Sound-Absorbing Foam
High density acoustic foam cell structure for maximum noise absorption
Helps to flutter echoes and reduce excess reflections and reverberation
Improves vocal clarity and acoustics of your room
Highly fire retardant
Ideal for use in recording studios, home theatres and karaoke room
8 Colors Available:
Black, Pearl White, Purple, Gray, Red, Blue, Baby Blue, Yellow
Sizes & Dimension:
50cm X 50cm X 2 cm (19.6 in X 19.6 in X 0.8 in)
25cm X 25cm X 2 cm (9.8 in X 9.8 in X 0.8 in)
Each Order Contains: 24 pcs Acoustic Foam,
FREE 4 pcs Tape
and FREE Guide
This New Acoustic Foam is made with High Quality Imported Foam. Sound
vibrations are broadcast thru the air, causing issues with noise entering and
exiting your house studio. This sound absorbing Polyurethane foam panel is
designed to reduce echo within an environment. The Pyramid Studio Foam
enhances the sound quality and aesthetics of any recording or listening
environment.
Why hire a Professional if you can construct a soundproof room in your house
yourself! For the very best quality, most complete soundproofing you just need
this New Acoustic Foam! It comes with an adhesive which makes it convenient
and easy to place. Buy these New Acoustic Foam now and have a perfect room
to party!
Property Value Metric (Imperial) Test Method:
Density (Core)
29 kg/m3 (1.8 lb/ft3) ASTM D1622
Compressive Strength
186 kPa (27.0 psi) ASTM D1621
Tensile Strength
241 kPa (35.0 psi) ASTM D1623
Open Cell Content
8.0% ASTM D2856
Water Absorption
1.2 % by volume ASTM D2842
Water Vapour Permeance
50mm sample
42 ng/Pa·s·m2 (0.70 Perms) ASTM E96
Dimensional Stability
Volume Change (%) after 28 days
-0.0 @ -20°C (-29°F)
1.5 @ 70°C (158°F) @ 97± 3% RH
0.4 @ 80°C (176°F)
ASTM D2126
Flame Spread Classification**
Flame Spread <>
Smoke Developed <>
CAN/ULC-S102
Including S127
Time to Occupancy***
24 Hours CAN/ULC-S774
Initial Thermal Resistance (50 mm)
RSI: 2.45 m2·K/W (R: 13.9 ft2·hr·°F / BTU) ASTM C518
Hot-Surface Performance
Passed when exposed to 93°C for 96 hours ASTM C 411
Fungi Resistance
After 28 day incubation - no fungal growth exhibited ASTM C1338
Applications:
Auditoriums
Broadcast Studios
Computer Rooms
Equipment Enclosures/Rooms
Gymnasiums
Gun Ranges
Home Recording Studios
Home Theaters
Industrial Facilities
Professional Theaters
Professional Recording Studios
Warehousing Facilities
General Installation Tips:
Soft Sound Wedge Tile Studio Foam is typically surface mounted on the walls within
a studio and will improve the overall acoustic performance of the space. It is important
that you evenly distribute the panels throughout the room and not cluster in one area.
The Wedge Tile Studio Foam is a modular pattern - the seams don’t always line up perfectly
when butting the pieces end to end, this is explained further below.
The Polyurethane foam outlined in these instructions is not a Class A fire rated material
and may not be acceptable for commercial environments.
Tools Required:
Straight edge utility knife
Tape measure
Caulking gun
Pencil or chalk line
Cutting:
1. Mark the Wedge Tile Studio Foam to the appropriate size using the tape measure and
marker.
2. Cut along the line using the utility knife. With the thicker foams, it may take several
passes to completely cut the Wedge Tile Studio Foam.
3. An alternate cutting method is to compress the foam along the line marked in Step 1.
With the material compressed, it will reduce the number of passes that must be made to
completely cut the foam.
Installation Methods:
1. Lay the Wedge Tile Studio Foam out for your specific application - keep in mind
that you want the foam evenly distributed throughout the room. Pyramid Foam is
a modular design and the seams don’t always line up with the pattern.
2. Measure any areas that need to be field cut on the foam and make the appropriate
cuts (examples would be around beams, doorways, or if a short piece is needed).
3. After all the pieces have been field cut, put the material back in the appropriate position
on the wall or ceiling and lightly mark the bottom and side of where each piece will be
lightly with a pencil to ensure straight application.
4. Glue each piece individually with PL Polyurethane Construction Adhesive. Create a
perimeter around the outside of the material staying 1 ½ “ away from the edge.
Create an X pattern across the center of the material.
5. Line the material up with the lines you marked in Step 3 and press firmly against the
material compressing the foam. Repeat step for remaining pieces of foam.
FAQ:
1. Is this product sold with whatever I need to mount/stick it on my walls?
If not,
what
product should I buy to do that?
Yes, it comes with an installation guide and 4 FREE adhesive tapes. Should you
need more tapes, you can
can add more
​
HERE.
2. Do you have other bundles?
Yes we do. We also offer this product in bundles of
​
​
6
,
12
,
48
and
96
.
3. Are these the right panels for soundproofing a subwoofer? If not, what
should I get instead?
It depends on the room size. These are sufficient but you should drop a
few more
dollars
and get something a little better quality.
4. Can I apply this on my door (inside my room) to prevent noisy neighbor
or the noise outside?
Yes, you can. But it wouldn’t keep 100% of the sound out, however. These
are really designed
to insulate a room and dampen sound before it hits a
wall and reflects back. They will keep
some sound out, but not too much.
If you're going to put it on a door just made sure you over
lap the gaps
between the door and the wall on all sides. Like, put the tile about an inch
past the
edge of the door.
5. Would these be good for sound proofing a bedroom?
No, that's really not what these are for. They provide echo damping, not
sound proofing. Sure, if you coated a door with the stuff on both sides it
might lessen the sound a bit, but it's really not what they're meant to do.
These panels are only designed to reduce room noise inside, not noises
from outside.
6. For the Tile Panel, is it small squares or is it a huge board?
We offer it in two sizes. Huge squares with the size of 50cm X 50cm X 2cm
(19.6 in X 19.6 in X 0.8 in), and small squares with the size of 25cm X 25cm
X 2cm (9.8 in X 9.8 in X 0.8 in).
7. Would this work for soundproofing an entire room for a recording studio?
This product will not 100% soundproof a room. But it will help with sound-
isolation of the room.
8. Can I spray paint them to make them a little more attractive?
You can, but we wouldn't advise this. Not only they are extremely porous
—
because clearly, its foam, it would change the condition to do what they were
originally intended to do (to collect sound). We suggest you buy different colors
of panels, we offer different colors for these kind of situations.
9. Can this product be used outdoors?
No, if it’s uncovered open area, it wont last the rain and sun. If it’s on a covered
area the dust or dirt may affect the quality of the foam and may affect it’s ability
to collect or isolate sound.
10. What is it made of?
Our Acoustic foam is a lightweight open celled foam material made from
polyurethane foam polyester, and also extruded melamine foam.
11. How do I arrange these around my room with studio monitors?
There are a couple of ways of doing it, one way is to arrange all of them
together on your wall opposite of your monitors another way is to spread
them out evenly around the room. For more ideas on you can check on you tube.
12. Are these flame retarded or fire proof?
Yes, they are.
Guaranteed:
FREE Shipping
FREE Returns Worldwide
100% Money Back
Ships in 2-3 business days
Tracking number included for all orders
1~2 Weeks Delivery Time